Daily inspection and equipment maintenance of the

  • Detail

Daily inspection and equipment maintenance of film blowing machine

detection of average value of data of film blowing test machine daily inspection and equipment maintenance of film blowing machine:

1. Check whether the temperature self-control is intact and the heating appliance is intact. Pay attention to timely adjust the heating temperature of each point within the index range

2. Check the traction speed and control the film thickness

3. Observe and adjust the film accuracy to meet the required thickness uniformity, and the folding diameter meets the standard

4. Check the air storage cylinder pressure, which should not be too high, but there should be standby pressure

5. Check and control the proportion of raw materials and mix them evenly

6. Check the raw materials for impurities, especially check the iron mixing with magnets in time

7. Check the lubricating oil lubrication of reduction gearbox and air compressor cylinder

8. Regular demonstration molds are based on the real shape of auto parts, while wood plastic composites refer to the temperature rise and mechanical transmission of running motors such as polyethylene and polypropylene. (end)

Copyright © 2011 JIN SHI